1-1/2” Square Bar Helical Pier
ECP’s 150 round corner square bar (RCSB) is the VERY BEST in the industry. ECP’s 150 is a 1-1/2” diameter RCSB that has a 7,000 Ft Lbs torque rating and an ultimate capacity of 70,000 lbs.
Many times helical piers and helical anchors are the best solution for your foundation project due to one of the following factors:
- Ease of Installation
- Little to No Vibration
- Immediate Load Transfer upon Installation
- Installed Torque Correlates to Capacity
- Easily Load Tested to Verify Capacity
- Installs Below Active Soils
- All Weather Installation
- Little to No Disturbance to Jobsite
2-7/8” (.276) Round Helical Pier
288 Helical Pier
ECP’s 288 helical pier is a 2-7/8” diameter tube with a .276 wall thickness. They have a 9,000 ft•lbs torque rating and an ultimate capacity of 100,000 lbs. ECP makes the VERY BEST helical piers in the industry.
Many times helical piers and helical anchors are the best solution for your foundation project due to one of the following factors:
- Ease of Installation
- Little to No Vibration
- Immediate Load Transfer upon Installation
- Installed Torque Correlates to Capacity
- Easily Load Tested to Verify Capacity
- Installs Below Active Soils
- All Weather Installation
- Little to No Disturbance to Jobsite
2-7/8” (.203) Round Helical Pier
288L Helical Pier
ECP’s 288L helical pier is they VERY BEST in the industry. ECP’s 288L is a 2-7/8” diameter tube with a .203 wall thickness. The 288L has a 5,500 ft•lbs torque rating and an ultimate capacity 60,000 lbs.
Many times helical piers and helical anchors are the best solution for your foundation project due to one of the following factors:
- Ease of Installation
- Little to No Vibration
- Immediate Load Transfer upon Installation
- Installed Torque Correlates to Capacity
- Easily Load Tested to Verify Capacity
- Installs Below Active Soils
- All Weather Installation
- Little to No Disturbance to Jobsite
1-3/4” Square Bar Helical Pier
ECP’s 175 is a 1-3/4” diameter round corner square bar (RCSB) that is the VERY BEST in the industry. ECP’s 175 has a torque rating of 10,000 ft•lbs and an ultimate capacity of 100,000 lbs.
Many times helical piers and helical anchors are the best solution for your foundation project due to one of the following factors:
- Ease of Installation
- Little to No Vibration
- Immediate Load Transfer upon Installation
- Installed Torque Correlates to Capacity
- Easily Load Tested to Verify Capacity
- Installs Below Active Soils
- All Weather Installation
- Little to No Disturbance to Jobsite
3-1/2” Round Helical Pier
ECP’s 350 helical pier is the VERY BEST in the industry. ECP’s 350 helical is a 3.5” diameter tube with a .300 wall thickness. ECP’s 350 has a torque rating of 13,000 ft•lbs and an ultimate capacity of 120,000 lbs.
Many times helical piers and helical anchors are the best solution for your foundation project due to one of the following factors:
- Ease of Installation
- Little to No Vibration
- Immediate Load Transfer upon Installation
- Installed Torque Correlates to Capacity
- Easily Load Tested to Verify Capacity
- Installs Below Active Soils
- All Weather Installation
- Little to No Disturbance to Jobsite
Drivecast Grouted Helical Pile
Drivecast is a grouted displacement pile that combines high capacity with limited site disturbance, giving contractors another strong piering option. Drivecast also brings the versatility in its ability to be adapted for areas with limited access or low clearance. The leads and extenders are all screwed in thanks to their helical plates. The installation process clears the way for a strong, consistent grouting column to provide additional strength for the pile.
Advantages of Drivecast
- Ease of Installation
- Little to No Vibration
- Minimal disturbance to site
- No specialty equipment needed for installation/li>
- Able to be used in areas with low overhead or other access restrictions.
- High end capacities
- Few if any spoils/li>